WELCOME TO IPT, INC., PRODUCTS FOR THE STONE CARE PROFESSIONAL

Hardrock Heavy Duty Stone Floor Grinding & Polishing Machine

This heavy duty stone machine will do it all. The weight add on system allows the addition of up to 95 pounds to provide the pressure needed for lippage removal on marble/limestone and for cutting and polishing hard, dense granite floors. By removing the weights, it can be used for standard polishing of marble floors. The quick change, 35 lb. drive plate can be removed and a standard brush pad driver can be substituted for standard scrubbing or buffing of all floor surfaces.

[Image]

Highlights/Features

Built-in AMP Meter - Allows for constant monitoring of current draw and selection of the correct weight.

Dual Start Triggers - For right or left hand operation, are non-conductive and have built-in safety lockouts to prevent accidental starting.

Heavy Duty Switch - Set in a die cast aluminum switch box which will not chip or rust.

50 Foot Long Power Cord - 3 wire safety yellow with water resistant jacket.

System for Adding Weight - Includes two 10 lb. discs and three 25 lb. discs, allows operator to adjust surface pressure while staying within recommended amperage range.

Enhanced high torque, triple planetary gear system - Permanently lubricated, 1.5 HP motor, operates at 175 RPM.

Diamond Disc Drive Plate - With 6 velcro diamond mounting pads and 6 water feed holes. Removable rubber base pad for driving steel wool or synthetic pads.

[Image]

Specifications

Motor: 120V, 14 amp, 1.5 HP, 60 Hz, DC Rectified for AC w/carbon brush wear indicator light.

Gears: 3 Idler - 11 to 1 ratio

Weight: 140 lbs. before adding weights